5 November 2015

MIL 188-110C App.D: BW24 KHz, SR19200 Bd, QAM-64


 

Cross Correlation Function returns 106.6 ms (Pic. 2) and highlighting a single frame it can be seen that the length of the mini-probe is worth 6.8 ms (Pic. 3): since the baudrate (19200 Bd), it makes ~130 symbols length. Now, looking at Table-D for 24KHz bandwidth waveforms (Pic. 4), this value (~130 symbols) can be assumed as 128 and consequently the data segment consists of 1920 symbols: this way we get (128 + 1920) 2048 symbols per frame that generate a 106.6ms ACF,  and 'salright (*). So, the waveform number may be 11 (64-QAM) or 12 (156-QA). The value of the carrier can be obtained in the fourth degree, wich is characteristic of QAM modulation (Pic. 5), and - althought it's not so clear - the typical 5 rings of QAM-64 are distinguished in the phase-plane constellation (Pic. 6).

Pic. 1 - 24 KHz bandwidth and 19200 Baud
Pic. 2 - CCF
Pic. 3 - Mini-Probe lenght
Pic. 4
Pic. 5 - detecting baudrate, carrier ad harmonics of the signal
Pic. 6 - the 5 rings (hardly distinguishable) correspond to QAM-64
(*) 'salright, it's all right, as Lennon sings here (Whatever Gets You Through The Night)

1 November 2015

Why I think this is Harris rather than Thales


I think this signal is the Harris "RF-5800 selective call" waveform, parameters as the speed, modulation and ACF fit fine, although they are the same than Thales Systeme-3000 ALE (pic. 1): unfortunately these two ALE signals have the same OTA parameters but not compatible at binary level due to proprietary adds.
This argument was already discussed here and this time I have an almost safe argument in favour of the 'Harris' identification: if you look at the signal you may see some voice segments and listening to them reveals a radio-check, in Spanish, between the operators callsigns "mercurio" and "830", briefly:
- 830 from mercurio k
- here mercurio, how copy me k
As you can see in the link below, "mercurio" is a Communications (HF and VHF) BMR in service in the Spanish Army (BMR 3560.56, aka "BMR Mercurio 2000"):
http://www.ejercito.mde.es/en/unidades/Las_Palmas/ciatrans16/Organizacion/materiales/index.html 
But more likely, from searches in the web, "mercurio 2000" could also be the name of a set of communications equipment that is installed in vehicles of the Spanish Army such as Vamtac, BMR or even Land Rover (!):
Now, download this pdf and take a look at page 10: the new VAMTAC will replace MERCURIO comm-vehicles starting from Jan 2013, and just below the picture you can read a mention just about the Harris RF-5800 that is used as HF equipment set (pic. 2): 

So:
- since these new VAMTAC vehicles are equipped with Harris RF-5800 
- since the communication vehicles seen above belong to the same (mil) network
there is no reason because "MERCURIO" should use (or be) a different proprietary equipement (as Thales, in this case) that would cause  interoperability issues inside the comm. network.

It remains to observe, in my opinion, that while logging these signals it's hard to say Harris rather than Thales, and vice-versa, without some other useful item such as an on line chat (as in this case) or a well-known working frequency.

Pic. 1
Pic. 2

29 October 2015

unid BPSK 100Bd & 200Bd


heard on 18255.0 (cf) monday, 26 October around 0830z the signal alternates BSPK segments with 100 and 1200 Baud. Out of these formats, the signal altenates long 11 carriers 150 Hz spaced preamble with a sort of modulated inserts. The signal is partially described in radioscanner.ru (missing the initial BPSK 100/1200 Baud part):
http://signals.radioscanner.ru/base/signal92/






28 October 2015

STANAG-4538, LDL BW3-BW4 samples

This is a recording of Low rate Data Link (LDL) protocol BW3, carrying Harris "Citadel" encrypted traffic, + BW4 LDL acknowledgments (ACK) waveforms: transmission was herad on 16716.0 KHz/USB. Both STANAG-4538 and MIL 188-141B/C App.C share these waveforms

pic.1
BW3 and BW4 waveforms, and the Data Link protocol (LDL), are identifiable by their duration as is specified in the STANAG-4538 official documentation "table 13-1":

pic.2 - BW4 lenght
For what concerns the BW3 waveform (pic.3), its ACF of 13.33ms (96 bits lenght, or 32 PSK-8 symbols) is a further test:

pic.3 - 13.33ms ACF of BW3 waveform
Bt the way, the LDL traffic consists of files which are encrypted using the Harris "Citadel" encryption system, as detecte by the analyzing the bistream once removed the Link Layer overhead (pic.4)

pic.4 - detecting Citadel encryption in the secondary protocol (LDL)

STANAG-4538 BW5 sample

waveform BW5

The usual 2G scenario (MIL 188-141 2G-ALE + MIL 188-110A/B 3KHz serial-tone) is replicated here but using 3G waveforms: the sample shows a data transfer, using one of the MIL 188-110C App.D serial-tone waveforms (precisely the waveform-id n.7 15KHz bandwidth, seen in another post), followed by STANAG 4538 FLSU 3G-ALE signal to supposedly close the link. 
To avoid confusions, MIL 188-141C Appendix C third-generation ALE is termed Link Set-Up (LSU) in STANAG 4538. Two non-interoperable protocols for link establishment are specified in STANAG 4538: Fast LSU (FLSU, smaller, lightly-loaded tactical networks) and Robust LSU (RLSU, large networks and heavy traffic).  The specifications previously contained in the Appendix C have been replaced with reference to the essentially identical NATO STANAG 4538: I refer to this document.

The ALE segments have been downsampled and decimated in order to get a better signal to analyze (pic. 2), so it was possible to identify the 3G-ALE as the Fast LSU burst-waveform n.5, or BW5 waveform as indicated in the table shown in picture 3, just from the standard STANG 4538. PSK-8 modulation is analyzed in pic. 4.

Pic. 2 - 3G-ALE signals after downsampling
lenght of the burst: 1013 ms
Pic. 3 - the heard signal mathces the characteristics of the BW5 waveform
Pic. 4